Understand that any homeowner has some level of control over the chances that a home’s roof might begin to leak. All homeowners should be aware of the factors that play the biggest role in increasing the chances for leakage. One factor the homeowner cannot control; the other two can have their level of influence reduced.

A homeowner’s need to worry about early detection of problems in roofing can be all but eliminated by using top-quality materials in the roof’s shingles and by hiring a company that promises top-notch installation. Of course, the roof’s exposure to the weather will prevent a total elimination of all detection-related concerns.

Schedule any inspection for an optimal time period

In areas that have a wet and dry season, the roof’s inspection by Roofing Contractor in Menlo Park should take place before the wet season. In areas with temperatures that differ markedly from season to season, it is best to inspect the home’s roof before the temperatures take a sudden dive.

Defects to note during the inspection

• If you have asphalt roofing, look for curling on the edges of the shingles.
• If you have a tile roof, check for signs that the tiles have become brittle. Have any of them become cracked?
• Cracks should also concern anyone that lives under a wood shake, clay or concrete roof.
• Dents and dings are two things that an inspector does not want to see, when examining a metal rooftop.
• In any type of roof, the appearance of bubbles indicates the existence of a problem.
• Any pools of water should alert the inspector. Such pools suggest that water damage could have already created unwanted changes in the roofing.
• Clogs in gutters or downspouts also send a warning signal. Such clogs encourage the formation of pools of water.

Tools used by professionals when inspecting roofing

A device that emits infrared rays can be used to discover those spots in the roofing where heat has managed to escape. With the utilization of electrical resistance techniques reveals the areas where moisture has collected. There are nuclear isotopic meters detect the presence of hydrogen atoms, because water contains hydrogen, such meters allow for enhanced detection of spots with an abundance of moisture.

The ability to measure the amount of water in a rooftop can work to lower the concerns of someone that cares about a roof’s condition. As the water can cause the roof’s weight to increase and that puts weight on the shingles, any one of them could crack. That could trigger formation of a leak. In addition, the roof’s watery contents would turn that rooftop into an excellent conductor. It could allow heat to escape from a family’s home. Roofing does not have to get damaged, in order to become the source of a problem.