The Pros And Cons of Sloped And Flat Roofing

The business owner with a store does not want the same type of roofing as the owner of a lovely private residence. For that reason, a business owner will see more advantages to a flat roof than those that can be imagined by a homeowner.

Why a flat roof offers advantages to the owner of a commercial building

The presence of the flat surface makes it easy to put bulky equipment in a suitable location. While the existence of a flat roof creates more space, you can still use the attic under such roofing can be used for storing all sorts of items. Additionally, it is easy to install solar panels on a surface that does not slope. The sections of the roofing could be used for creation of a garden. This would allow the business under that rooftop garden to appear eco-friendly. Consequently, consumers with concerns about the environment would feel inclined to use that same business.

How flatness in roofing could be bad for a commercial building

Flat roofs are more expensive, because the installer must carry out an involved process. In fact, the hardest part of the installation comes at the time when the insulation needs to be put in place.

In recent years, there have been new rules by roofing expert in Palo Alto CA, regarding the thickness of insulation in a building with flat roofing. In the past, insulation with a 1-inch thickness was acceptable. Newer regulations call for installation of insulating material that has a 5-inch thickness. Homeowners need to know that extreme weather is hard on a flat roof.

How a sloped roof offers advantages to a homeowner?

Roofing with a slope is more aesthetically pleasing. Traditionally, all homes had sloped roofs, even those that had thatched roofing. The materials used in sloped roofs last longer than the ones used in commercial roofs. A list of such materials would include products such as these: composition shingles, dimensional shingles, wood shingles, concrete and tile.

This sort of roofing costs less to install than one that has a flat surface.

Two drawbacks to placing a sloped roof on a family’s home

Valleys get introduced more frequently in sloped roofing. Those are places where two planes come together. If a valley does not get sealed properly, it could develop a leak. Then, the family living under the sloping rooftop suddenly sees water dripping from some spot in the ceiling. As mentioned above, it is easy to put solar panels on a surface that does not form some type of slope. A homeowner could get hit with a large bill, after electing to have solar panels installed on a home’s sloped rooftop. Moreover, once those panels have been added to the sloping rooftop, the sun cannot be hit them during every single hour of daylight.